McIntosh WK-3 Manual de usuario descargar pdf (Pagina 32)

SETUP

How to Assign the Video Converter

tnemgissAretrevnoCoediV

rebmuNtupnIgnitteStluafeDgnitteSweN

1FFO

2FFO

3FFO

4FFO

5FFO

6FFO

7FFO

8FFO

9FFO

01FFO

11FFO

How to Assign the Video Converter

The MX132 Video Converter feature allows you to config-

ure any Composite input signal to be converted to an S

signal that will appear at the Zone A S Video Output.

This allows accessory video components that only have

Composite outputs to be used together with components

that have S outputs and have both types of video signals

available at the MX132 S Video Output. The Composite

signals will still appear at the Composite Video Output.

1. Press and hold the front panel Setup pushbutton ap-

proximately three seconds to enter the Setup Mode.

The SETUP pushbutton will illuminate, the word

SETUP will appear on the front panel display and the

MAIN SYSTEM SETUP MENU will appear on the

Monitor/TV screen. See Figure 6.

Note: The Video Converter Setup Menu display includes a

0 input which corresponds to Tuner, that does not

have a matching video input. This was included in the

On Screen menu only to maintain a display consistency.

See Figure 19. The Video Converter Assignment Chart

therefor does not include this input.

2. Press pushbutton number 7 on the Remote Control to

access the VIDEO CONVERTER MENU, which will

appear on the Monitor/TV screen. See Figure 19.

Note: The very first time the VIDEO CONVERTER MENU is

accessed, the screen will indicate the factory default

settings.

3. Press a LEVEL Up or Down pushbutton on the Remote

Control until the Input you wish to convert blinks on

and off.

4. Press the Mode pushbutton on the Remote Control to

cycle the converter ON or Off.

5. Repeat Steps 3 and 4 to convert as many video inputs as

you desire.

6. After all Video Input conversions adjustments are com-

plete, press pushbutton E on the Remote Control to

exit to the MAIN SYSTEM SETUP MENU.

7. Press E a second time to exit the MAIN SYSTEM

SETUP MENU and the Adjustment Acceptance

MENU will appear on the Monitor/TV screen. Refer to

Figure 7.

8. If you are satisfied with adjustments you have made,

press Remote Control pushbutton number 1 for YES.

The changes will be saved in memory and you will exit

the Setup Mode to normal operation.

Figure 19

MENU: VIDEO CONVERTER

( SELECT WITH LEVEL UP/DOWN

CHANGE WITH MODE BUTTON)

0. OFF 4. OFF 8. OFF

1. OFF 5. OFF 9. OFF

2. OFF 6. OFF 10. OFF

3. OFF 7. OFF 11. OFF

( PRESS E TO EXIT )

9. If you are not satisfied with the adjustments or changes

you have made, press number 0 on the remote control

for NO. The Setup Mode will exit to normal operation

without saving the changes in memory.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Comentarios a estos manuales

Sin comentarios

McIntosh WK-3 Manual de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Teclados numéricos McIntosh WK-3