McIntosh WK-3 Manual de usuario descargar pdf (Pagina 44)

Figure 60

OPERATION

How to Operate Remote Zones

How to Operate Zone B

Figure 59

The MX132 includes the valuable feature of be-

ing able to operate and control two audio/video

zones, independently of each other. Zone A is

designed to be the primary or Home Theater lis-

tening area with a full featured surround sound

and signal processing capability.

Zone B is configured for a remote location to

provide two channel audio and video programs

which can conveniently access all the audio/

video source components connected for Zone A.

You can enjoy one program source in Zone A,

and another different program source and vol-

ume level in Zone B.

The program source selected for Zone A ap-

pears at the right on the MX132 Front Panel

Display, and the program source selected for

Zone B appears to the left. Zone A source selec-

tions are also referred to as Input A/ Listen signals and are

selected by the Input A/Listen selector. Zone B source se-

lections are also referred to as Input B/Record signals and

are selected by the Input B/Record selector.

1. Turn ON Zone B by pressing the POWER pushbutton

on a keypad, or Remote Control in Zone B. Refer to

Figure 59 & 60.

Note: The only way Zone B can be turned on, is from a keypad

or a Remote Control located in Zone B. If Zone B is on

and Zone A is not on, the MX132 Front Panel Display

will indicate ZONE B ON. Source selection may also be

accomplished from the front panel INPUT B (Record)

selector after Zone B has been turned on.

2. Select the desired Listening source by pressing an IN-

PUT pushbutton on a keypad or Remote Control. Refer

to Figure 61 & 62.

Note: The wakeup preset volume level can be adjusted to the

desired level by accessing the ZONE B VOLUME

PRESET LEVEL MENU.

Figure 61

3. Adjust the Volume to the

desired listening level by

pressing an UP or DOWN

pushbutton on a keypad or

Remote Control. Refer to

the Keypad Owners

Manual for detailed operat-

ing instructions.

4. Mute the audio by pressing

the MUTE pushbutton on a

keypad or Remote Control.

5. If a McIntosh CD Player is

connected to the MX132,

most major operating func-

tions can be performed

with a keypad or Remote

Control.

6. Turn Zone B OFF by press-

ing the Remote Control

POWER pushbutton.

7. Turn the entire MX132

System OFF from Zone B

by pressing the SYS OFF

pushbutton on a keypad or

remote Control.

Rec Lock

Press the MX132 front panel REC (Record) LOCK

pushbutton to block all Zone B operating functions. Since

Zone B program sources are also Record signals, this al-

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 50 51 52

Comentarios a estos manuales

Sin comentarios

McIntosh WK-3 Manual de usuario Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Teclados numéricos McIntosh WK-3